PB Systems
PowerBox Source
169,00 €
Features
High performance
Optimised cooling
Small size
Optional OLED screen, 128x64 pixels
Four different output voltages
Suitable for use with all battery types
Can be controlled by PowerBox CORE, switch, BlueCom or USB interface
Supports six different telemetry systems: CORE P²BUS, Jeti EX-Bus, Futaba S.BUS2, Multiplex M-Link, Graupner Hott, JR DMSS
Redundant regulator design
Suppression of servo feedback currents
Protection against electro-static discharge
Integral regulator monitoring
Can be updated using the USB Interface or BlueCom Adapter
less
Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 85mA
Current drain Standby 10µA
Maximum load current Peak 2x20A
Drop-out voltage 0.3V
Output voltage 5.9V / 7.4V / 7.8V / 8.4V
Screen OLED 128 x 64 pixels (optional)
Supported telemetry systems PowerBox, Jeti, Futaba, Graupner, Multiplex, JR
Dimensions 54 x 88 x 23 mm
Weight 77 g
Weight Sensor Switch 15 g
Temperature range -30°C to +85°C
Set contents
PowerBox Source
SensorSwitch
2 PowerPatch-leads (1x MPX / MPX and 2x MPX / JR)
4 rubber grommets and brass spacers, factory-fitted
4 retaining screws
Operating instructions in English and German
High performance
Optimised cooling
Small size
Optional OLED screen, 128x64 pixels
Four different output voltages
Suitable for use with all battery types
Can be controlled by PowerBox CORE, switch, BlueCom or USB interface
Supports six different telemetry systems: CORE P²BUS, Jeti EX-Bus, Futaba S.BUS2, Multiplex M-Link, Graupner Hott, JR DMSS
Redundant regulator design
Suppression of servo feedback currents
Protection against electro-static discharge
Integral regulator monitoring
Can be updated using the USB Interface or BlueCom Adapter
less
Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 85mA
Current drain Standby 10µA
Maximum load current Peak 2x20A
Drop-out voltage 0.3V
Output voltage 5.9V / 7.4V / 7.8V / 8.4V
Screen OLED 128 x 64 pixels (optional)
Supported telemetry systems PowerBox, Jeti, Futaba, Graupner, Multiplex, JR
Dimensions 54 x 88 x 23 mm
Weight 77 g
Weight Sensor Switch 15 g
Temperature range -30°C to +85°C
Set contents
PowerBox Source
SensorSwitch
2 PowerPatch-leads (1x MPX / MPX and 2x MPX / JR)
4 rubber grommets and brass spacers, factory-fitted
4 retaining screws
Operating instructions in English and German
Ref. n°: PB3420